JBL SYNTHESIS SDP-40 User Manual page 103

SDP-40
LISTENING MODE DESCRIPTIONS
The SDP-40 offers an assortment of listening modes for 2-channel, Dolby Digital, dts(-ES), and analog sources. Listening mode descriptions
begin below and continue in the order shown on the MODE ADJUST menu. The table included with each description indicates the
corresponding listening mode menu parameters, as well as their factory-default and possible parameter settings. All listening mode menus are
shown in the Appendix beginning on page A-14. Listening mode menu parameter descriptions begin on page 5-34.
FILM
MODE ADJUST L7 FILM
• A proprietary listening mode.
• Designed for enhanced playback of 2-channel stereo or matrix-
encoded film sources.
• Derives seven channels from 2-channel sources, as well as full-
frequency stereo surround channels that realistically increase
the perceived width, length, and sense of envelopment of the
listening space.
• Provides remarkable improvement compared to other
decoders.
• Recommended for 2-channel stereo or matrix-encoded film
sources.
Default
Parameter Setting
AUTO AZIMUTH ON
VOCAL ENHANCE +0.0dB
RE-EQUALIZER ON
SOUND STAGE REAR
5 SPKR ENHANCE ON
BASS ENHANCE OFF
SURR ROLLOFF 15.3kHz
REAR DLY OFFSET 15ms
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
MODE ADJUST
Possible
Settings
ON, OFF
+6.0dB, +3.0dB, +0.0dB
ON, OFF
FRONT, NEUTRAL, REAR
ON, OFF
ON, OFF
500Hz to 20.0kHz, OFF
OFF, 1 to 30ms
5-5