JBL SYNTHESIS SDP-40 User Manual page 148

SDP-40
Zone 2 & Record Zone Audio Performance
Signal-to-Noise Ratio • 105dB minimum, 108dB typical, 22kHz bandwidth
Input Sensitivity • 200mVrms (4Vrms for maximum output level)
Input Impedance • 100kΩ in parallel with 150pF
Output Level • 200mVrms typical, 4Vrms maximum (RCA connectors)
• 400mVrms typical, 8Vrms maximum (XLR connectors,
Zone 2 only, SDP-40 Balanced only)
• Maximum value with full-scale input signal and volume
at 0dB
Output Impedance • 100Ω in parallel with 150pF (RCA connectors)
• 50Ω in parallel with 150pF (XLR connectors, Zone 2
only, SDP-40 Balanced only)
Video Input & Output Connectors
Video Inputs • 5 composite (RCA), 8 S-video, and 4 component
video (3 RCA and 1 BNC)
Video Outputs • 4 composite (RCA, 2 monitor and 2 Record Zone), 2
S-video (2 monitor and 2 Record Zone), and 1
component (BNC)
Composite & S-video Performance
Compatibility • NTSC, PAL, and SECAM
Switching • Active
Output Level • 1.0V peak-to-peak
Impedance • 75Ω
(continued)
Specifications are subject to change without notice.
Composite & S-video Performance
Input Return Loss • >40dB
Differential Gain • <0.5%
Differential Phase • <0.5°
Bandwidth • >25MHz
K Factor • <0.3%
Gain • ±0.15dB
Signal-to-Noise Ratio • >70dB
Frequency Response • 10Hz to 10MHz + 0.1/-0.3dB
Component Video Performance
Compatibility • 3-channel (Y, Pr, Pb), format-independent
Switching • Passive
Impedance • 75Ω
Insertion Loss • <3dB
Bandwidth • >300MHz
Microphone Input Connectors
Inputs • 4 3.5mm miniature phone jacks
Input Sensitivity • 10mVrms (400mV maximum input level)
Input Impedance • 20kΩ (accepts balanced or unbalanced input signals)
Appendix
(continued)
. . . Specifications continues on page A-4
A-3