JBL SYNTHESIS SDP-40 User Manual page 55

SDP-40
Parameter Possible Settings
INPUT SELECT DIGITAL, ANALOG, AUTO
ANALOG BYPASS ON, OFF
S-VIDEO 16:9 AUTO, OFF
S-VIDEO OSD 4:3 ON, OFF
COMPONENT OSD ON, OFF
INPUT SELECT
SETUP INPUTS DVD1 MAIN ADVANCED
Controls the interaction of the digital and analog audio input
connectors assigned for the selected Main Zone input. The table on
the next page describes INPUT SELECT parameter settings.
Note:
When the Shift command bank is activated, the 7/5
button can be used to adjust the INPUT SELECT
parameter, cycling through the DIGITAL, ANALOG,
and AUTO settings.
ANALOG BYPASS
SETUP INPUTS DVD1 MAIN ADVANCED
Allows analog sources to bypass A/D conversion and internal
processing. When ON is selected, the SDP-40 passes analog input
signals directly to the Main Zone audio output connectors.
• When a 2-channel analog source is present, the SDP-40 passes
analog input signals directly to the Front L/R output
connectors.
DIGITAL, ANALOG, AUTO
INPUT SELECT
ON, OFF
ANALOG BYPASS
• When a 5.1-channel analog source is present, the SDP-40
passes analog input signals to the Main Zone audio output
connectors as indicated in the table on pages 2-7 and 3-41.
When OFF is selected, the SDP-40 sends analog input signals
through A/D conversion and internal processing before passing
them to the Main Zone audio output connectors. This allows
analog sources to use bass management, speaker crossovers,
speaker distance calibration, and audio controls (tone controls).
Note:
When the Shift command bank is activated, pressing
the 2CH button toggles the ANALOG BYPASS
parameter between the ON and OFF settings.
S-VIDEO 16:9
SETUP INPUTS DVD1 MAIN ADVANCED
Controls the passage of anamorphic trigger signals present in some
video sources. When AUTO is selected, the SDP-40 passes
anamorphic video input signals through the S-video switcher,
enabling compatible display devices to automatically switch
between anamorphic and non-anamorphic display modes.
When OFF is selected, the SDP-40 does not pass anamorphic video
input signals through the S-video switcher, preventing compatible
display devices from automatically switching between anamorphic
and non-anamorphic display modes.
. . . Configuring Advanced Input Settings continues on page 3-16
SETUP
AUTO, OFF
S-VIDEO 16:9
3-15