JBL SYNTHESIS SDP-40 User Manual page 53

SDP-40
was activated the last time a 2-channel source was present. The
SDP-40 will not activate a
48kHz PCM digital source is present. The
are not compatible with 88.2 or 96kHz, Dolby Digital, or analog
sources.
Note:
When the 2-CH parameter is set to USE LAST, the
SDP-40 will not activate the 2-CHANNEL listening
mode if the 2CH button was used to activate the
2-CHANNEL listening mode the last time a 2-channel
source was present. Instead, the SDP-40 will activate
the listening mode that was activated prior to the
2-CHANNEL listening mode.
D
SETUP INPUTS DVD1 @*D
Opens the D MODE menu shown on the previous page, which
can be used to select a preferred listening mode for Dolby Digital
sources. The SDP-40 automatically activates the selected listening
mode whenever a Dolby Digital source is present. When the USE
LAST setting is selected, the SDP-40 automatically activates the
Dolby Digital listening mode that was activated the last time a
Dolby Digital source was present.
The 5.1 MUSIC listening mode cannot be selected as the
preferred listening mode for Dolby Digital sources. However, when
the D parameter is set to USE LAST, the SDP-40 will activate the
5.1 MUSIC listening mode if this listening mode was activated
the last time a Dolby Digital source was present.
R listening mode unless a 44.1 or
listening modes
R
SETUP INPUTS DVD1 @@@!
Opens the MODE menu shown on the previous page, which
can be used to select a preferred listening mode for dts(-ES)
sources. The SDP-40 automatically activates the selected listening
mode whenever a dts(-ES) source is present. When the USE LAST
setting is selected, the SDP-40 automatically activates the dts(-ES)
listening mode that was activated the last time a dts(-ES) source
was present.
The MUSIC listening mode cannot be selected as the
preferred listening mode for dts(-ES) sources. However, when the
parameter is set to USE LAST, the SDP-40 will activate the
MUSIC listening mode if this listening mode was
activated the last time a dts(-ES) source was present.
5.1a
SETUP INPUTS DVD1 5.1a
Opens the 5.1a MODE menu shown on the previous page, which
can be used to select a preferred listening mode for 5.1-channel
analog sources. The SDP-40 automatically activates the selected
listening mode whenever a 5.1-channel analog source is present.
When the USE LAST setting is selected, the SDP-40 automatically
activates the 5.1-channel analog listening mode that was activated
the last time a 5.1-channel analog source was present.
The 5.1a MUSIC listening mode cannot be selected as the
preferred listening mode for 5.1-channel analog sources. However,
when the 5.1a parameter is set to USE LAST, the SDP-40 will activate
the 5.1a MUSIC listening mode if this listening mode was
activated the last time a 5.1-channel analog source was present.
SETUP
3-13