JBL SYNTHESIS SDP-40 User Manual page 64

SETUP
Setting Crossover Points
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP SETUP
SYNTHESIS 7CH Speaker Setups
SETUP SPEAKERS SET CROSSOVERS
Selecting the CROSSOVER SETUP menu SYNTHESIS 7CH SETUP
option opens the SYNTHESIS 7CH SPEAKER SETUP screen shown
above, which indicates that pressing the
matically configure the Main Zone audio output connectors for a
SYNTHESIS 7CH speakers setup.
When the Synthesis 7 Channel SPEAKER SETUP screen opens:
• Press the arrow button to configure the Main Zone audio
output connectors for a SYNTHESIS 7CH speaker setup. The
SYNTHESIS 7CH SETUP menu shown above will open on the
on-screen display.
• Press the arrow button to close the message without
configuring the Main Zone audio output connectors for a
SYNTHESIS 7CH speaker setup.
When a SYNTHESIS 7CH speaker setup is selected, the SDP-40
applies a 80Hz crossover point with a 24dB-per-octave filter to the
Front L/R, Center, Side L/R, and Rear L/R output connectors. The
3-24
(continued from page 3-23)
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS SYNTHESIS 7CH SETUP
SPEAKERS THX SETUP
REAR PANEL CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGERS
80Hz
LOCK OPTIONS
80Hz
M
SUB
80Hz 80Hz
SYNTHESIS 7CH SETUP
arrow button will auto-
SYNTHESIS 7CH SETUP
!CAUTION! !CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
R SR RR
SYNTHESIS
80Hz 80Hz
7CH SPEAKER
CONFIGURATION
C
L SL RL
80Hz 80Hz
SDP-40 applies a 80Hz crossover point with a 24dB-per-octave fil-
ter to the Subwoofer L/R output connectors.
SYNTHESIS 7CH SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
JBL