JBL SYNTHESIS SDP-40 User Manual page 102

MODE ADJUST
MODE BUTTONS
The front panel and remote control Mode buttons can be used to
audition listening modes with the current Main Zone input source.
Pressing the Mode or + button scrolls upward through listening
modes available for the current Main Zone input source. Pressing
the Mode or – button scrolls downward through listening modes
available for the current Main Zone input source. For instance, if a
2-channel source is present in the Main Zone, the Mode buttons
can be used to audition 2-channel listening modes.
Scrolling occurs in the order shown on the MODE ADJUST menu.
The selected listening mode appears in the bottom-left corner of
the Main Zone two-line status. The selected listening mode is
automatically activated when scrolling stops.
Input Source
Button
MUSIC
* These listening mode names differ depending on the current input source, speaker setup, and parameter settings. Refer to the Listening Mode Descriptions section that begins on the
next page for more information.
† The MODE SELECTION NOT AVAILABLE message appears on the on-screen and front panel displays when the selected listening mode family does not offer a listening mode for the
current Main Zone input source.
5-4
2-Channel Dolby Digital
PLII +
PLII MOVIE
FILM
5.1
TV
FILM
MUSIC
5.1
MODE FAMILY SELECTION BUTTONS
, , ,
The remote control mode family selection buttons can be used to
select a listening mode within the corresponding mode family.
Pressing a mode family selection button activates the most
appropriate listening mode for the current Main Zone input source.
For instance, pressing the L7 button while a 2-channel source is
present in the Main Zone activates the
The table below indicates the listening modes associated with each
mode family selection button.
dts(-ES)
5.1 *
DIGITAL*
FILM
5.1 TV
N/A†
MUSIC
MUSIC
, , and
FILM listening mode.
5.1-Channel Analog
5.1a
N/A† N/A†
FILM* 5.1a
N/A† N/A†
* N/A†
MUSIC* 5.1a
JBL
*
FILM
MUSIC