Recalling A Program; Protecting A Program - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 81 Tuesday, January 25, 2000 3:03 PM

Recalling a Program

A
Press the {Program} key.
B
Make sure that [Recall] is selected.
C
Press the [OK] key.
Note
Programs that have been stored
beforehand are represented by a
number.
D
Select the program number you
want to recall with the [←] [→] or
{~} {}} keys.
Note
You can also select the program
number with the Number keys.
E
Press the [OK] key.
Programs—Storing Your Print Settings in Memory
F
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
G
Press the {Start} key.

Protecting a Program

If you want to prevent someone from
writing over your program, do the
following.
A
Press the {Program} key.
B
Select [Protect] with the [←] or
{~} key.
C
Press the [OK] key.
1
81