No Rmon Event; Hostname; Clear Commands Summary Table - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2

no rmon event

Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>

hostname

Use the hostname command to change the Command Line Interface (CLI)
prompt. The current switch number always appears at the end of the prompt.
The syntax for this command is:
hostname [<hostname_string>]
hostname_string
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.

Clear Commands Summary Table

Following is a Table of the Privileged Level clear commands.
• clear timezone
• clear ip route
• clear snmp trap
• clear vlan
• clear dynamic vlans
• clear port static-vlan
• clear cam
• clear log
• clear port mirror
94
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
Returns the timezone to its default, UTC.
Clears IP routing table entries.
Clears SNMP trap on the system.
Clears VLAN entries.
Clears dynamic VLAN entries.
Clears a VLAN statically configured on a
port.
Clears all the CAM entries.
Clears the Log entries of a switch.
Cancels port mirroring.
Page 95
Page 95
Page 95
Page 96
Page 96
Page 97
Page 97
Page 97
Page 97
Avaya P334T-ML User's Guide