Table 7.9 Vlan Commands; Show Vlan Command; Set Vlan Command; User Mode - Avaya P334T-ML User Manual

VLAN Commands
Table 7.9
Command
show vlan
set vlan
clear vlan

User Mode

show vlan Command

Use the show vlan command to display router Layer 2 interfaces.
The syntax for this command is:
show vlan [details]

Configure Mode

set vlan Command

Use the set vlan command to create router Layer 2 interface.
The syntax for this command is:
set vlan <vlan-id> name <vlan-name>
vlan-id
vlan-name
Example:
Router-N(configure)# set vlan 2 name vlan2
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
P334T-ML User's Guide
VLAN Commands
Interface Index
Interface name (used in layer 3 protocols)
Chapter 7 CLI – Layer 3
Page
211
211
212
211