Figure A.1 The Welcome Page; Running The Embedded Manager - Avaya P334T-ML User Manual

Running the Embedded Manager

Note: You should assign an IP address to the switch before beginning this
procedure.
1 Open your browser.
2 Enter the URL of the switch in the format http:// aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the IP address of the switch.
Note: The user name is "root"
The default password for read-only access is "root"
The default passwords for read-write access are "enable" or "super".
Note: The Web management passwords are the same as those of the CLI. If you
change the passwords of the CLI then use those passwords for Web management as
well.
3 The welcome page is displayed.
Figure A.1
P334T-ML User's Guide
The Welcome Page
Appendix A Embedded Web Manager
215