Set Port Spantree Priority; Set Port Spantree Cost - Avaya P334T-ML User Manual

The syntax for this command is:
set port spantree {enable|disable} [module/port]
enable|disable
module/port
Output Example:
Enable the spanning tree mode for port 2 on module 3.
P330-N# set port spantree enable 3/2

set port spantree priority

Use the set port spantree priority command to set the priority level of a
port. This value defines the priority of a port to be blocked in case two ports with
the same costs cause a loop.
The syntax for this command is:
set port spantree priority [module/port] [value]
module/port
value

set port spantree cost

Use the set port spantree cost command to set the cost of a port. This value
defines which port will be allowed to forward traffic if two ports with different costs
cause a loop.
The syntax for this command is:
set port spantree cost [module/port] [value]
module/port
value
Avaya P334T-ML User's Guidee
Enables or disables the spanning tree mode for the
specified ports.
The switch/port number. A range of ports can be specified
as well.
The switch number/the port number.
Number representing the priority of the port. The priority
level is from 0 to 255, with 0 indicating high priority and
255 indicating low priority. A port with a lower priority
will be blocked.
The switch number/the port number.
Number representing the cost. The cost level is set from 1
to 65535. A lower cost (lower value) specifies precedence
of a port to forward traffic.
Chapter 6 CLI – Layer 2
121