Avaya P334T-ML User Manual page 118

Chapter 6 CLI – Layer 2
• set port disable
• set port speed
• set port duplex
• set port name
• set port trap
• set port vlan
• set port vlan-binding-
mode
• set port static-vlan
• set port channel
• set port classification
• set port redundancy
on/off
• set port redundancy
• set internal buffering
• set boot bank
• set intermodule port
redundancy
• set intermodule port
redundancy off
• set port mirror
• set port spantree
• set port spantree
priority
• set port spantree cost
100
Administratively disables a port.
Sets the speed for a 10/100 port.
Sets the duplex mode of a port.
Assigns a name to a port.
Enables/disables the SNMP up/down
link traps sent for port.
Assigns the Port VLAN ID (PVID).
Defines the port binding method.
Defines a multiple VLANs per port.
Defines a LAG interface.
Defines port classification.
Defines/deletes a link redundancy
entry.
Enables/disables all the defined link
redundancy schemes.
Sets internal buffering capacity to
maximum/minimum.
Configures the boot bank from which
the switch will boot.
Defines the stack's unique fast
redundancy scheme.
Clears the intermodule redundancy.
Sets a port mirroring source-destination
pair in the stack.
Enables or disables the spanning tree for
switch ports.
Sets the port spantree priority level.
Sets the port spantree cost.
Page 111
Page 112
Page 112
Page 114
Page 114
Page 114
Page 115
Page 115
Page 116
Page 116
Page 117
Page 117
Page 118
Page 118
Page 119
Page 120
Page 120
Page 120
Page 121
Page 121
Avaya P334T-ML User's Guide