3
5
Select the copying conditions when resetting the machine.
Touch [AUTO RESET Key Setting] to display the job setting keys.
–
Touch [Full-auto] to set to the factory default setting.
–
Touch [Initial Setting] to set as "3 Copier Setting >1 Reset Setting
>1 Initial Setting".
When [Initial Setting] is selected for [AUTO RESET Key Setting], Each
Reset Setting becomes enabled.
6
Select the finishing conditions when resetting the machine.
Touch [Finisher Mode by Full-auto].
Touch any key on the screen for Full Auto, and then touch [OK].
The Reset Function Setting Screen will be restored.
7
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
3-52
Utility <User Setting>
Océ im9220