Oce im9220 User Manual page 383

6
LDAP
This screen appears when you click [LDAP] on the [Network] tab. The screen
is used to enter and confirm settings concerning LDAP.
When LDAP is set to disable, you still need to set parameters. Make sure to
enter parameters correctly.
Note
The parameters to be entered vary according to previously specified au-
thentication method.
Simple and Digest-MD5 require a login name and password, while GSS-
SPNEGO requires a domain name of Active Directory in addition to the
login name and password.
- Enter for individual items.
LDAP, LDAP Server Address, Port Number, Use SSL, Port Number (SSL),
Search Root, Search Timeout, Max # of LDAP Hits, Authentication Meth-
od, User Authentication, Login Name, Password, Domain Name.
- [Check LDAP Setting] button: Click the button to check the LDAP setting.
- [Apply] button: Click the button to apply the new settings.
- [Clear] button: Click the button to clear the settings that were entered.
To check LDAP Setting:
1. Enter for individual items.
2. Click the [Check LDAP Setting] button on the LDAP screen.
3. Click the [OK] button on the Completed screen.
It will take you back to the LDAP screen again.
6-34
Web Connection Setting
Océ im9220