Oce im9220 User Manual page 27

1
12
Select Wide Size Paper when loading the wide size of paper in the
specified tray.
– Touch [Wide Size Paper] to display the Wide Size Selection Screen.
– Touch the desired wide size key to highlight it.
– Touch [Lead Edge], [Rear Edge], or [Center] to specify the desired
image position.
– Touch [Input Size] to display the Wide Size Input Screen.
– Touch [X] indicating the horizontal size, then enter the desired size
using the control panel keypad. The value should fall within the
range from the horizontal size of the standard wide size paper to a
maximum of 445mm can be set. Similarly, touch [Y] indicating the
vertical size, then enter the desired size. The value should fall within
the range from the vertical size of the standard wide size paper to
a maximum of 314mm.
When using the 9265, the maximum size will be 223mm; when us-
ing the 9267, the maximum size will be 460mm.
– Touch [Select Size] to return to the Select Size Screen.
Touch [OK] to complete the setting and return to the Size Setting
Screen.
1-16
Paper Setting
Océ im9220