Oce im9220 User Manual page 261

4
5
Touch [Next] and then touch [14 Network Setting Clear].
The Initialization for Network Setting Screen will be displayed.
6
Touch [Initialize Set] to recover the initial setting specified at the time of
shipment.
7
Touch [OK] to return to the IP NIC Setting Screen.
If further changes are required, touch the desired key.
8
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Detail
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
4-150
Utility <Administrator Setting>
Océ im9220