Oce im9220 User Manual page 233

4
5
Touch [5 SNMP].
The SNMP Setting Screen will be displayed.
6
For each item, select or enter a required value.
– SNMP
– Read Community Name
– Write Community Name
7
Touch [OK] to return to the IP NIC Setting Screen.
If further changes are required, touch the desired key.
8
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Detail
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
4-122
Utility <Administrator Setting>
Océ im9220