Oce im9220 User Manual page 111

3
4
Check that the X coordinate and Y coordinate displayed in the first line
of the message area fall within the standard value displayed in the sec-
ond line.
5
Touch each [Check Button] at the upper left and lower right corners on
the screen to check if the buzzer tone functions normally.
6
If the coordinates fall out of the range of the standard value in step 4,
or the buzzer tone does not sound in step 5, repeat the adjustment
prOcédure from steps 4 to 5 or contact your service representative.
7
Press [1] of the control panel keypad to return to the Utility Screen.
3-64
Utility <User Setting>
Océ im9220