Oce im9220 User Manual page 52

Utility <User Setting>
Specific setting and Description
4 Tandem Selection after JOB completion
Select to continue or release the tandem mode after
the current tandem job is completed.
Continue/Release
5 Distribution Recovery
Set the tandem-connected machines to perform the
job distribution again for print quantity remaining on
one machine when the other has already finished with
its assignment.
On/Off
3 Copier Setting
1 Reset Setting
1 Initial Setting
Set the initial setting when the machine is reset.
Current Setting/Factory Default
2 Reset Function Setting
3 Initial by Key Counter Insert
Select to reset the copying conditions to the initial
setting when inserting the key counter and the copy
card.
On/Off
2 Each Function Setting
Booklet Copy Auto Select
Set the machine to automatically select the Booklet
mode when Fold & Staple or Half Fold mode is select-
ed.
Auto Select/Not Auto Select
Original Glass AMS
Set the machine to detect the size of the original and
select the appropriate magnification ratio to corre-
spond to the selected paper size.
On/Off
ADF AMS
Set the machine to automatically select an appropri-
ate ratio for copying when detecting the original size
placed on the ADF.
On/Off
Océ im9220
AUTO RESET Key Setting
Set the on-screen indication which is displayed
when pressing [Reset].
The factory default setting is [Full Auto], and the
initial setting is the settings defined in "1 Initial
Setting".
Full auto/Initial Setting
Finisher Mode by Full-auto
Select the Finisher mode when Full Auto is se-
lected as pressing [Reset].
Group/Sort/Staple/Fold & Staple/Half Fold/Face
UP/Face Down
Default
Release
On
Factory Default
Full-auto
Sort
On
Auto Select
On
On
3
3-5