4
–
Report Items: Select the desired report items. More than one item
can be selected.
Touch [Clear All] if none of them are required. However, the authen-
tication failure transmission will be performed even if all report
items are cleared.
9
Touch [OK] to return to the IP NIC Setting Screen.
If further changes are required, touch the desired key.
10
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Detail
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
4-160
Utility <Administrator Setting>
Océ im9220