Oce im9220 User Manual page 53

3
Specific setting and Description
Original Glass APS
Set the machine to automatically select the same size
of copy paper as the original placed on the original
glass.
On/Off
Auto Detect Orig. Size in ADF
Set the machine to automatically select the same size
of copy paper as the original placed on the ADF.
On/Off
Choose Default Tray when APS Off
Select the tray to be automatically selected when
APS is released.
APS Tray/Tray1/Tray2/Tray3/Tray4/Bypass Tray
Org./Out Bind Direction Set
Set the machine to conform the binding direction of
the originals and printed sets each other.
On/Off
Staple Auto Reset
Set the stapling setting On or Off when pressing [Re-
set].
On/Off
Original Set/Bind Direction
Select to reset or save the original direction setting
made on the Special Original Screen and the bind po-
sition setting made on the Output Mode Screen after
completion of each copying job.
Do Not Release/Release Per JOB
Status Hold When Auto Reset
When Auto Reset functions, select to reset the Plat-
en/RADF mode to the initial setting, or save the pre-
vious setting.
Hold/Not Hold
Annotation at JOB completion
Set the machine to automatically select Annotation
after a copying job has been made.
Select/Not Select
Original Glass Auto Copy Reserve
Set the machine to automatically display the Job Re-
serve Screen when the current job has completed
scanning originals from the original glass and started
printing.
On/Off
4 Scanner Setting
1 Default Address Setting
Select the default destination to be displayed when select-
ing the Scanner Screen.
E-Mail/HDD/FTP/SMB
2 Each Function Setting
3-6
Utility <User Setting>
Default
On
On
APS Tray
On
Off
Release Per JOB
Not Hold
Not Select
Off
E-Mail
Océ im9220