Oce im9220 User Manual page 269

4
6
Specify to use the SNMP Trap transmission and authentication failure
transmission functions.
– SNMP Trap Transmission
– Auth. Failure Transmission: Select [On] or [Off] to transmit by SNMP
in the case that any authentication failure in Read Community
Name or Write Community Name of SNMP occurs.
7
Specify the Trans Address Setting.
Touch [Trans Address Setting] on the SNMP Trap Setting Screen, then
touch the desired key from 1 to 5 of transmission address setting to
display the SNMP Trap Trans Address Setting Screen.
Specify the following items, using up/down arrow as required.
Touch [OK] to complete the settings.
– Address SNMP Trap Trans
– SNMP Trap Trans Address
– SNMP Trap Trans Port No.
– Trans Community Name
4-158
Utility <Administrator Setting>
Océ im9220