Oce im9220 User Manual page 81

3
8
Touch [User Density] on the Basic Screen to restore the Set User Pre-
set Density Level Screen.
9
Repeat step 6 to 8 when outputting more than one sample sheet for
each level.
10
Check the sample sheet and enter the desired density level using the
control panel keypad.
The number entered will be displayed in the box above Set Density.
– To output the sample sheet of the specified density level, touch [Set
Density] then touch the [Copy]. Place the original on the original
glass, and press the [Start] on the control panel.
11
Touch [OK] to complete the setting and return to the User Density Set-
ting Screen.
12
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
3-34
Utility <User Setting>
Océ im9220