Oce im9220 User Manual page 266

Utility <Administrator Setting>
– Domain Name
– Dynamic Authentication
9
Touch [Connect Confirm] to check that the machine is connected to
the LDAP server.
If connection error occurs, a popup menu will be displayed.
– The [Connect Confirm] key will not be displayed if LDAP Function is
set to [Not Use], or Registering and Changing Address of Prohibit
User Operation is set to [Restrict].
– The settings of Setting Up LDAP Screen can be reset to the factory
initial setting.
Touch [Reset All] to display the popup menu for confirmation, then
touch [Yes] to reset all the setting, or touch [No] to cancel.
10
Touch [OK] to complete the setting and return to the LDAP Setting
Screen.
If further changes are required, touch the desired key.
11
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
Océ im9220
4
4-155