Oce im9220 User Manual page 222

Utility <Administrator Setting>
– TCP/IP Filter refuse setting
– Network Test Ping Address
7
Touch [OK] to return to the IP NIC Setting Screen.
If further changes are required, touch the desired key.
8
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Detail
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
Océ im9220
4
4-111