Sartorius CW3P Operating Instructions Manual page 75

Product
Electrical Accessories
External red/green/red display for CW3P models
Second display* for CW3P models
Remote display*, 7-segment, e. g. 45 mm character size
Bar code scanner, 120 mm scanning width, with cable for
connection to Combics CW3P models
Bar code scanner for Combics CW3S models,
adapter cable YCC02-R12F6 required
Foot switch, incl. D-Sub 25-pin T-connector
Hand switch, incl. D-Sub 25-pin T-connector
External Alibi memory for electronic storage of weighing data
Scanner for loading weighing data in a PC from YAM13IS card
Power supply for YAM01IS or YAM02IS
Memory card for YAM01IS
Cable for connecting Combics indicator to YAM01IS Alibi memory
Cable (9-pin D-Sub; length: 2 m) for connecting YAM01IS to PC
Flow control for pumps with analog or pulse interface
Additional Accessories
Dust covers (2 pcs)
IP65 Upgrade Kit for IP44-protected indicators (CW3P)
Anti-theft locking device
Cable gland for Combics CW3S models, IP67
Mechanical Accessories
Retainer plate for attaching the indicator to the front
of the weighing platform, AISI 304 stainless steel,
for platform sizes 400 + 300 mm / 500 + 400 mm
Installation kit for installing the Combics
in a pit (separable connection to indicator)
Retainer for wall mounting; stainless steel
Floor-mounted column
Floor-mounted column; stainless steel
Base for installing the floor-mounted column
Base for installing the floor-mounted column; stainless steel
Retainer for a bar code scanner, for attachment to
floor-mounted column, bench stand or complete scale retainer
Plate for attaching a printer to the floor-mounted column or bench stand YPP01CWS
Software
Flexible formatting options for printouts
(e.g., for bar codes with variable font size, graphics, etc.)
Sartorius WinScale scale driver software for Windows 95/98/2000/NT.
Displays the scale readout on your PC monitor and provides secure
memory for storing data that is subject to legal control.
YCC01-09ISM5 RS-232 connecting cable required
SartoConnect data transfer software for connecting your
Sartorius scale to a computer running Windows 95, 98 or NT.
This software lets you load the data recorded by your scale in
a PC application program such as MS Excel or Access.
Includes a cable for connecting the scale to a PC
* not for use in legal metrology
Order No.
YRD11Z
YRD02Z
Information
on request
YBR02CISL
YBR02FC
YFS01
YHS02
YAM01IS
YAM02IS
YAM11IS
YAM13IS
YCC01-10CIM3
69EM0012
YFC02Z-V2
YDC01CI
YAS01CISL
YTP01CI
YAS04CIS
YDH12CWS
YAS99I
YDH02CIS
YDH03CIP
YDH03CIS
YBP03CIP
YBP03CIS
YBH01CWS
Information
available
on request
YSW03
YSC01I
75