Operating Menu Overview (Parameters) - Sartorius CW3P Operating Instructions Manual

Operating Menu Overview (Parameters)

o = Factory setting
W User-defined setting
Setup
Application parameters: Please refer to the operating instructions for Combics 3 "Basic Application Programs"
Fn-key
Off
o Gross/net toggling
Toggle weight units
10 + higher resolution
Device Parameters
WP-1
1
) = function will be made available in future
Off
1
RS-232 )
SBI standard
SBI verifiable
o IS-232
ADC-232
Internal
Calibration/Adjustment
CAL Key Function
Calibration/Adjustment Sequence
isoCAL Function
External Calibration/Adjustment
External Weight
Adapt Filter
Min. vibration
o Normal vibration
Strong vibration
Extreme vibration
Application Filter
o Final readout
Filling mode
Low filtering
W/o filtering
Stability Range
1/4 digit
1/2 digit
o 1 digit
2 digits
4 digits
8 digits
2
) = not available on scales verified for use in legal metrology
o Ext. cal./adjust.; default weight
Ext. cal./adjust.; weight can be selected
Key blocked
Calibration with automatic adjustment
o Calibration with adjustment triggered manually
o Off
Adjustment prompt
2
)
o Accessible
Blocked
Cal./adj. weight
2
)
2
)
2
)
2
)
21