Sartorius CW3P Operating Instructions Manual page 33

Example:
Weighing: Tare the scale by placing a container on the weighing platform
e
)
Turn on the Combics
The self-test function runs. When the display shows a weight readout, the Combics 3 is
automatically zeroed and ready to operate. When there is no load on the platform, you
can zero the scale at any time by pressing (.
Place empty container on the platform
Tare the scale
Note: If the automatic tare function is enabled, you do not need to press the ) key
to tare the scale; the tare weight is stored automatically when you place the container
on the platform
Wait until a zero value is displayed together with the NET symbol.
Place empty container on the platform
Wait until the weight unit symbol is displayed (indicating stability)
and then read off the weight value
33