Optional Units And Consumables; Ink Cartridge - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.7 Optional Units and Consumables

1.7.1 Ink Cartridge

Selection of ink types, detection of cartridges and the amount of remaining ink are
controlled by CSIC.
When installing the pigment ink cartridges, shake them gently
C H E C K
a couple of times beforehand to ensure the designed print
P O I N T
quality.
The 220 ml ink cartridges are supported only by Stylus Pro
9600.
SPECIFICATION
Type: Pigment / Dye ink cartridge
Form: Exclusive ink cartridge
Ink capacity:
110ml (Model Number: ICxx24)
220ml (Stylus Pro 9600 only) (Model Number: ICxx25)
Dimension:
×
110ml: 25.1 mm (W) 165.8 mm (D)
×
220ml: 25.1 mm (W) 280.8 mm (D)
Total weight:
110ml: approx. 200g
220ml: approx. 385g
Effective ink:
110ml: more than 97.0 g
220ml: more than 205.0 g
Color:
Photo Black, magenta, light magenta, cyan, light cyan, yellow Light Black
(pigment only), Matte black (pigment only)
Environment condition
Temperature: 10°C ~ 40°C
Relative humidity:: 5% ~ 85%
Product Description
×
105.3 mm (H)
×
105.3 mm (H)
Optional Units and Consumables
Storage temperature
Condition temperature
Packed -30°C ~ 40°C
Installed -20°C ~ 40°C
Packed -30°C ~ 60°C
transportation
If you remove an ink cartridge before it reaches the ink end state,
C H E C K
you should store it under the same ambient conditions as for the
P O I N T
printer body in such a way that the ink discharge opening is
protected from dust intrusion. The ink cartridge stored as such and
installed again can be used if it is within the term of availability.
Ink life: 2 years from production date
Print quality assured: pigment:
6 months after open / dye: 2 years from production date
INSTALLATION LOCATIONS
The locations to install the ink cartridges are assigned from the left side of the ink
cartridge holder as indicated below:
Table 1-60. Locations to Install Ink Cartridges
Dye
1 K
2 K
3 C
4 M
5 LC
6 LM
7 Y
Any ink cartridge other than the K and LK ink cartridges is
C H E C K
equipped with a wrong insertion preventing mechanism so that it
P O I N T
can be installed only at its position and in the correct orientation.
Revision A
Remarks
Within 1 month when 40°C
Within 1 month when 40°C
Within 1 month when 40°C
Within 120 hours when 0°C
Pigment 1 Pigment 2 Pigment 3
Photo K Matte K Matte K
Lk Lk Matte K
C C C
M M M
LC LC LC
LM LM LM
Y Y Y
98