I/H Cover - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.2.4 I/H Cover

1. Remove the L Side Cover. (p.163)
2. Open the I/H Cover Lid.
3. Remove one black screw (M3×6), then remove the lever
4. Remove two screws (CBS: M3×10), then remove the I/H Cover and I/H Cover Lid.
(See Figure 4-13)
For easy removal and installation of the I/H Cover, set the I/H
C H E C K
Lever in the raised (Release) position.
P O I N T
Disassembly & Assembly
cap.(See Figure 4-13)
I/H Lever
Release
Lock
Removing the Panel Unit and Housing
Black screw
Screws (CBS: M3×10) ×2
Figure 4-13. I/H Cover Removal
Revision A
Lever Cap
I/H Cover Lid
164