Platen Position Checking - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

5.2.3.11 Platen Position Checking

Check the adjusted position of each sponge on the platen.
Make certain that the printed pattern agrees with the right and left positions of
each sponge position.
Pattern drawing method: 360dpi, Uni-D, 240CPS, VSD2, Large
Adjustment
[Enter] Adjust Print
[Enter]
Printing Pattern
Printing end
Platen Pos. R:
?
[Enter]
Adj :
Figure 5-40. Menu Transition for Platen Position Checking
Figure 5-41. Print Pattern for Platen Position Checking
Self-diagnostic Function
0.0mm
∆
[Paper Feed ]Key: +
∇
[Paper Feed ]Key : –
Cut Adj.
*Setting is possible in increments of 0.1 mm.
Revision A
245