Illegal Ink Cartridge; Epson Stylus Pro; Maintenance Tank Full; No Maintenance Tank - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

3.2.2.16 Illegal ink cartridge

Item
LCD PANEL
INVALID CARTRIDGE
MESSAGE
LED STATUS Corresponding color LED lights up
Explanation This error occurs when illegal ink cartridge is installed.
Recovery Push the Pause button.

3.2.2.17 Maintenance tank full

Item
LCD PANEL
MAINTENANCE TANK FULL
MESSAGE
LED STATUS Maintenance tank LED lights up
Explanation This error occurs when maintenance tank is full.
Recovery Replace a maintenance tank.

3.2.2.18 No Maintenance tank

Item
LCD PANEL
NO MAINTENANCE TANK
MESSAGE
LED STATUS Maintenance tank LED lights up
Explanation This error occurs when maintenance tank is not installed properly.
Recovery Replace a maintenance tank.
Troubleshooting
Table 3-20.
Description
Table 3-21.
Description
Table 3-22.
Description

3.2.2.19 Wrong IK designation

Item
LCD PANEL
MESSAGE
LED STATUS
Explanation
Recovery

3.2.2.20 Fatal Error

Item
LCD PANEL
MESSAGE
LED STATUS
Explanation
Recovery
Fatal error type
Error Display
Table 3-23.
Description
COMMAND ERROR
All color LEDs blink
This error occurs when ink type (dye / pigment / black ink type)
designated with IK command is different from ink cartridge
installed in the printer, or when non-supported ESC/P3 format
data is received.
Stop data transmitting from the host and reset the panel.
Table 3-24.
Description
SERVICE REQ. nnnnnnnn
nnnnnnnn indicates type of error.
All color LEDs blink
This error occurs in following cases
• A serious failure is detected which can not fixed by users.
• A life end of a unit is detected and the continuous operation
may cause a more fatal problems.
• Printer halted by an un-expected operation or command
receiving.
Once turn off the printer and on if the error is cleared, then user
can use the printer.
If the fatal error of the same code occurs again and results in
impossible printer operation, find the cause of the trouble by
consulting "3.2.4 Troubleshooting for Service Call Errors
(p.134)" and replace the relevant defective parts.
Refer to "3.2.1.3 Service Call (Fatal) Errors
Revision A
(p.125)".
131