Pf Timing Belt Tension Adjustment - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

5.3.3 PF Timing Belt Tension Adjustment

This adjustment is necessary for service operations that require you to remove/loosen
the PF Motor or PF Belt. When replacing or re-installing the PF Belt, you need to
confirm the tension of the PF Belt.
Adjusting tools: Tension Gauge #F770
2,200g ± 10%
Standard:
(Tension in the PF motor mounting plate moving direction.)
NOTE: For disassembly and assembly procedure, refer to
Loosen the screws (x4) fixed to the PF motor mounting board and set the tension gauge
to the hole on the board and pull to the movable direction.
Adjustment
"PF Motor (p.185)".
Mechanism Adjustment
Fixed screws
Figure 5-65. PF Belt Tension Adjustment
Revision A
Fixed screws
2.200g ± 10%
264