Epson Stylus Pro; Consumables Life - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.3.27 Consumables life

Cutter life
How to calculate
The number of times the cutter has been used is calculated by counting down
from 2000. The count is reduced by one every time one sheet is cut
irrespective of paper sizes.
The counter is cleared at replacing the cutter with a new one.
Display (Life)
100 ~ 81%
80 ~ 61%
60 ~ 41%
40 ~ 21%
20% ~ 1%
Less than 1% remaining
Maintenance Req.
Not happen, because
• Cutter condition can be checked with cutting.
• It doesn' t cause big obstacles.
• Users can replace a cutter easily.
Fatal error
Not happen.
Counter clear
The counter is cleared at replacing the cutter with a new one.
The indication as described above may not be accurate depending
C H E C K
on the conditions of use, thus it is given only as a yardstick.
P O I N T
Product Description
E∗∗∗∗∗F
E∗∗∗∗ F
E∗∗∗ F
E∗∗ F
E∗ F
F F
CR motor life monitor
How to calculate
It is displayed with tube life (B1 width), because tube friction causes CR
motor trouble. The tube life is calculated with the number of CR scan times.
Printer Model
Stylus Pro 7600
Stylus Pro 9600
Note : 1 pass = 1 round trip
Display (Life)
100 ~ 81%
80 ~ 61%
60 ~ 41%
40 ~ 21%
20% ~ 1%
Less than 1% remaining
Maintenance Req.
It is happened when the life is less than 4%.
Fatal error
When the remainder of the life is judged to be 0 by taking into account
damage to the tube, service call occurs.
Counter clear
When "CLEAR COUNTERS CR MOTOR" or "CLEAR COUNTERS CR
TOTAL" in Maintenance mode 2 is executed, the counter is cleared.
Information on these values is needed only when service personnel
C H E C K
perform maintenance work. Do not inform users of the meaning of
P O I N T
these indications.
Operating Panel
Table 1-36. Reference value
Number of Passes
250 million passes B0/ Speed
325 million passes A1/ Speed
E∗∗∗∗∗F
E∗∗∗∗ F
E∗∗∗ F
E∗∗ F
E∗ F
F F
Revision A
Condition
51