Epson Stylus Pro 7600 Service Manual page 69

EPSON Stylus Pro 7600/9600
UNIT CHANGE
Users can change length unit of LCD panel / pattern print with this mode.
METER: meter (m)
FEET/INCH: Feet(ft)/Inch(in)
Unit of following messages can be changed;
Item
Panel LCD display Paper counter
Job information display (Paper used)
Nozzle check pattern Current Paper Count
Previous Paper Count
Status sheet Use Paper
Job information print Paper used (vertical)
Paper used (horizontal)
Note : This function is available only for English.
PARALLEL I/F MODE
Users can switch parallel I/F receiving speed with this mode; ECP/compatibility
1284.4 SETTING (D4)
Users can set 1284.4mode with this mode ON.
Product Description
Table 1-47.
Message
Meter
xxxxx.xcm xxxxft xxin
xxxxxxxcm2 xxxxxx.xsqft
xxxxx.xcm xxxxft xxin
xxxxx.xcm xxxxft xxin
xxxxxx.xcm xxxxft xxin
xxxxxx.xcm xxxxft xxin
xxxxxx.xcm xxxxft xxin
INK INFORMATION MENU
It displays ink information recorded in CSIC.
Manufacture logo: Manufacture information saved in CSIC of each ink
•
cartridge is displayed.
Ink Color: Ink color information saved in CSIC of each ink cartridge is
•
displayed.
Ink Type: Ink type information saved in CSIC of each ink cartridge is
•
displayed.
Ink capacity: Ink capacity information saved in CSIC of each ink cartridge is
•
Feet/Inch
displayed.
Ink remaining: Ink remaining of each ink cartridge is displayed.
•
Product date: Product date information saved in CSIC of each ink cartridge is
•
displayed with <YY>/<MM> form.
Expire date: Ink expire date information saved in CSIC of each ink cartridge
•
is displayed.
Ink life after open: Ink life information saved in CSIC of each ink cartridge is
•
displayed.
Passed time after open: Passed time after opened of each ink cartridge is
•
displayed.
NOTE: These are displayed every color (K~Y).
SSN MENU
Paper feed adjustment table
m2 value set by mechanism sequence command "Paper feed adjustment" is converted
to the actual paper feed adjustment value with paper feed adjustment table saved in
NVRAM.
(The conversion is valid when mechanism sequence command "Paper feed adjustment
mode = ON".)
Users can change following conversion table with this maintenance mode.
• User table for dye media
• User table for pigment media
Change of paper feed adjustment table by users
Format
"XXx=nn:mm"
Operating Panel
Revision A
69