Epson Stylus Pro 7600 Service Manual page 234

EPSON Stylus Pro 7600/9600
5.2.3.3.2 Input on Panel
In this mode, select an input type to input a code by operating on the panel.
(See Figure 5-22)
INPUT LINE SELECTION
In this mode, select an input line on which you input the code by panel operation.
(See Figure 5-23)
NOTE: For pigment code input, "Pigment-1" ~ "Pigment-3" are displayed.
Adjustment
Rank Input :
? Dyestuff ?
Rank Input :
? Pigment ?
Figure 5-22. Menu Transition of Panel Input
Input Line :
?
[Paper Feed ∇]
Input Line :
?
[Paper Feed ∇]
Input Line :
?
Figure 5-23. Menu Transition for Input Line Selection
Self-diagnostic Function
[SelecType]
To the mode for selecting an input line for dye
[SelecType]
To the mode for selecting an input line for
pigment
Code input mode is entered by pressing [SelecType] key.
Dye-1
[Paper Feed ∆]
Code input mode is entered by pressing [SelecType] key.
Dye-2
[Paper Feed ∆]
Code input mode is entered by pressing [SelecType] key.
Dye-3
Day Pigment
Figure 5-24. Head Code Label Position
Revision A
234