Epson Stylus Pro 7600 Service Manual page 162

EPSON Stylus Pro 7600/9600
10. Open the Front Cover. (See Figure 4-9)
11. Remove one black screw (CBP: M4×10).
12. Bring down the Paper Set Lever to the front.
13. Remove the R Side Cover by lifting it outward.
In installing the R Side Cover, install the Lever Blind Cap before
tightening the screws.
If you have dropped the Lever Blind Cap into the printer body,
remove the R Side Cover from the printer body and take out the
Lever Blind Cap.
Disassembly & Assembly
(See Figure 4-10)
Removing the Panel Unit and Housing
Black screw (CBP: M4×10)
Front Cover
Figure 4-9. R Side Cover Removal 4/5
Paper Set Lever
Figure 4-10. R Side Cover Removal 5/5
Revision A
162