Report Settings - Oce im7520 User Manual

Utility Mode

11.14 Report Settings

You may select the Report Settings to be On or Off. This settings prints the
reports of communication management, communication result and reserva-
tion. If ON is selected, the manner of printing may also be selected.
Item
Activity Report
TX Report
Sequential TX
Report
Timer Reserva-
tion TX Report
Confidential RX
Report
Bulletin TX Re-
port
Relay TX Result
Report
Relay Request
RX Report
PC-Fax TX Er-
ror Report
Broadcast Re-
sult Report
TX Result Re-
port Check
*
indicates factory default setting.
!
Detail
While in the selection of [1 Dest. at time], the output of the Broadcast
Result Report is restricted only when a redial is tried with no successful
transmission available. When a transmission is terminated normally, no
report is issued.
When selecting [ON] in "TX Result Report Check", the TX Report will be
printed if YES is selected. The report will not be printed if NO is selected.
im7520/im6020
Description
Determines whether to print the report and
the timing at which the report will be printed
out.
Set up the Broadcast Result Report printing
method.
Determines whether to display the trans-
mission result report select screen. If you
select [ON], it will be displayed after each
transmission.
Available value
OFF / Daily / Every 100
*
Comm. / 100/Daily
When you set the output
of Activity Report to [Dai-
ly] or [100/Daily], you can
also set the time to out-
put the report.
*
ON / If TX Fails / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
All Dest. / 1 Dest. at a
time
*
OFF / ON
11-59
11