Oce im7520 User Manual page 136

6
6 Specifications
6.1 Specifications
Main product specifications relating to facsimile functions are indicated
below.
Specifications are subject to change without notice.
Item
Image memory capacity
Max. no. of stored pages
Applicable lines
Scanning line density
Baud rate
Transmission time
Coding methods
Max. scanning size
Max. recording size
6-2
Specifications
In case of optional hard disk is installed : 30 GB*
In case of optional hard disk is not installed : 32MB
In case of optional hard disk is installed : Max. 9000 pages* (In
case of optional hard disk is not installed, it is dependent on im-
age memory capacity.)
(numbers of pages in the case of storing Océ standard A4-size
pages containing approximately 700 characters at "fine" resolu-
tion)
Subscriber telephone lines (including facsimile communication
networks)
PBX lines
G3
Ultra Fine:
Super Fine: 16 dot/mm × 15.4 line/mm,
Fine:
Normal:
Communications are performed at any of the above scanning line
densities according to the capabilities of the destination machine.
2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200, 21600,
24000, 26400, 28800, 31200, 33600 bps
2 seconds
Time if sending Océ standard A4-size pages containing approxi-
mately 700 characters at "normal" resolution. This is the trans-
mission time for the image only, and does not include the time
required for communication control. Actual communication time
varies according to the contents of the originals, the type of tele-
phone line of the destination and factors.
MH, MR, MMR, JBIG
11 inch × 17 inch (280 mm × 431 mm) or A3 (420 mm × 297 mm)
Width: 297 mm
Length: MAX. 1000 mm
11 inch × 17 inch (280 mm × 431 mm) or A3 (420 mm × 297 mm)
Originals in excess of 1000 mm cannot be received.
When receiving originals longer than the paper size in the paper
trays, printing is made according to the setting of [Print Separate
Fax Pages].
Specifications
600 dpi × 600 dpi
8 dot/mm × 15.4 line/mm,
400 dpi × 400 dpi
8 dot/mm × 7.7 line/mm,
200 dpi × 200 dpi
8 dot/mm × 3.85 line/mm,
im7520/im6020