Program - Oce im7520 User Manual

Before Use
2.4.2

Program

Registering into the [Program] the destination and communication functions,
you can call the information of registration only by pressing the [Program]
key.
!
Detail
[Address Book], [Group] and [Program] can be also registered using the
Web Connection. Using the Web Connection, setting can be changed or
addresses can be registered from a computer connected to the network.
Refer to the "Web Connection" on page 13-2 or User's Guide (Network
Scanner) for the method to use the Web Connection.
You can register the Scan Setting and Comm. Setting functions. For
details, see "Registering the Program" on page 10-22.
Program
This section describes procedures for registering into the [Program] the
registration name and destination.
1
Press [Utility/Counter] on the control panel to open the Utility Mode
screen if it is not already displayed.
– When the optional hard disk has been installed, up to 400
addresses (001 - 400) can be registered for the [Program]. (If no
hard disk has been installed, up to 200 addresses can be
registered.)
2
Press [One-Touch Registration].
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [One-
Touch Registration], enter the "1" on the keypad.
3
Press [Fax].
im7520/im6020
2
2-11