Utility Mode
11.12.3Closed Network RX
The closed area reception function can be enabled or disabled.
When set to ON, set the password used for the Closed Network RX by 4
digits.
Closed area reception means that your FK-502 will receive the incoming data
only when the sender's password is valid. The FK-502 checks if the sender's
password is equal to that defined for your FK-502. If the two passwords are
different or the sender does not provide a password, a communication error
results.
Item
Closed Net-
work RX
*
indicates factory default setting.
Setting up closed network area reception
0
Functions incompatible with closed area reception
The use of this function is available only when the machine on the other
end is provided with the Password Transmission function.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
im7520/im6020
Description
The closed area reception is the
function used to receive the incom-
ing data only when the sender's
password is valid.
Available value
*
ON / OFF
The password is a number
of up to 4 digits.
11
11-41