Specifying Settings From the Control Panel
3.25
Total Counter Report Setting
You can specify the total counter notification schedule and notification des-
tination.
The settings that can be specified in the total counter screen are described
below.
Item
Set Schedule
Set notification addresses
Device Nickname
[Send Now] button
To specify the total counter report settings
1
In the Administrator Setting screen, touch [5 Network Setting].
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [4 Total Counter Report Setting].
The Total Counter Report Setting screen appears.
4
Specify the desired settings.
5
Touch [Close].
cm2520
Description
Specify the period for notifying the total counter. Two types
of notification schedules can be specified. For details on
specifying the setting, refer to "Schedule Setting" on
page 3-108.
Specify the e-mail address of the notification destination.
The schedule can also be specified per address. For details
on specifying the setting, refer to "Notification Address Set-
ting" on page 3-110.
Specify the model name that is included in the notification
e-mail. Use the keyboard that appears in the touch panel to
type in the model name (up to 20 characters).
Touch to send the current total counter to the notification
destination.
3
3-107