Setting The Relay User Box - Oce im7520 User Manual

Registering/Settings
10.8

Setting the Relay User Box

With this machine, the Relay RX function using the F code can be used.
To use this machine as an intermediate relay station, the [Relay RX] should
be set to ON in the Function ON/OFF Setting in the Utility Mode and then the
Relay User Box should be registered. Up to 5 Relay User Boxes can be
registerd.
!
Detail
Notify the originating station side transmitting the document of this
setting.
To use the [Relay RX], the terminating station should be registered as
Group in advance.
Refer to p. 11-36 for the setting of the Relay RX.
Refer to p. 7-41 for the operation to specify a relay at the time of
transmission (operation of the originating station).
Refer to p. 10-16 for the registration of Group.
Relay User Box can be also registered using the Web Connection. Refer
to the "Web Connection" on page 13-2 for the method to use the Web
Connection.
Registering the Relay User Box
1
Press the [Utility/Counter] key.
2
Press [One-Touch Registration].
im7520/im6020
10
10-53