When Unable To Send - Oce im7520 User Manual

3
3.6

When Unable to Send

If transmission cannot be done due to the receiver being busy or for some
other reason, the redial function can be used for the transmission.
The redial function of this machine includes the auto redial function, manual
redial function and Fax Retransmit function.
!
Detail
Address cannot be changed by the auto redial function nor the manual
redial function.
Refer to p. 5-2 if transmission cannot be still effected by redialing due to
a line trouble or for any other reason.
Redialing
Redialing refers to dialing the number of the same destination again.
If a facsimile cannot be sent due to a busy signal from the receiving machine
or for some other reason, the machine redials the number after a
predetermined amount of time has elapsed. During that interval before the
number is redialed, the transmission document is treated as a reserved
document waiting to be sent.
Auto Redial function
If the transmission is not effected due to the receiver being busy, etc., the
address is automatically redialed according to the [Number of Redials] which
has been set to the Telephone Line Settings.
!
Detail
The redialing function is set at factory to redial one time after a three-
minute interval. The number of redials and the redialing interval can be
changed in the Utility Mode. For details, see "Telephone Line Settings"
on page 11-30.
3-30
Transmission
im7520/im6020