Oce im7520 User Manual page 219

Registering/Settings
5
Press [Name] and then enter the name of Address Book.
– For the operation of the entering character, see page 14-3.
– The name can be up to 24 characters.
– In [No.], an unused number is displayed.
6
Enter the FAX number of the destination on the keypad.
– The following key can be used.
– [Tone] :
– [Pause]:
– [-] :
–
–
– [Delete] :
– [Out side] :
– Up to 38 digits can be entered.
– When an erroneous input is made, correct it by pressing [Delete] to
delete characters one at a time, or pressing [C] (clear) to delete all.
– When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is
displayed on the screen.
im7520/im6020
When using a rotary dialing (pulse) telephone line,
press [Tone] to select push-button tone mode. This is
used when using a FAX information service and so
forth when Tone is selected. A "T" is displayed on the
screen.
Press [Pause] to insert a space in a dialed number.
Pressing [Pause] once creates an interval of one sec-
ond between numbers. Multiple spaces can also be
entered. A "P" is displayed on the screen.
This is entered as a separation symbol when dialing.
It has no effect on dialing. A "-" is displayed on the
screen.
: Moves the cursor to the left.
: Moves the cursor to the right.
Characters on the position of the cursor are deleted
one by one.
When the cursor is at the right end, the character are
deleted from the rear end.
When the [PBX ON Set] is ON, [Out side] can be spec-
ified. By selecting it, [E-] is displayed.
Refer to p. 11-57 for more information about PBX CN
Set.
10
10-5