Removing The Delivery Motor; Separation Motor Unit; Removing The; Removing The Main Cover - Canon DADF-Q1 Service Manual

[1]
[2]

3.3.3.4 Removing the Delivery Motor

1) Remove the screw [1] from the bottom of the DADF, and remove the bear-
ing [2] and the rod [3].
[2]
2) Remove the four screws [1], and detach the hinge (right) [2].
[1]
[1]
4) Remove the screw [1], and detach the delivery motor sensor [2].
4) Remove the grip ring [1], and detach the lock plate [2].
5) Remove the E-ring [3], and remove the belt retaining washer [4] and
the gear [5].
6) Remove the screw [6], and detach the delivery motor [7].
[1]
[3]
[1]
[1]
F-3-43
[3] [1]
F-3-44
[2] [1]
[1]
[1]
F-3-45
[1] [2]
F-3-46
[7]
0011-2485
If you have replaced the delivery motor, be sure to adjust the sensor and the
delivery motor.

3.3.4 Separation Motor Unit

3.3.4.1 Removing the Front Cover
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-49
F-3-50

3.3.4.2 Removing the Main Cover

1) Open the upper cover, and insert a screwdriver from above the hook; then,
remove the two hooks [1].
[2]
[5]
[4] [3]
F-3-47
F-3-48
Chapter 3
[6]
[1]
0011-9101
0011-9102
3-7