Copyboard Glass - Canon DADF-Q1 Service Manual

When mounting the reversing guide, do so while forcing it in the direction of the arrow. If not mounted properly, it can trigger jams.
3) Remove the ADF controller cover, and set the DIP switch (SW1) ADF controller PCB as follows.
4) Press the push switch (SW2) on the ADF controller PCB.
- The reversing assembly will start to operate.
5) Clean with lint-free paper moistened with alcohol.

4.2.4.4 Copyboard Glass

1) Wipe the copyboard glass of the copier with a cloth moistened with alcohol.
Screw Reversal guide
F-4-9
[1]
F-4-10
F-4-11
J16 J15
J1
J2
J4
CB1
SW1
J5
IC8
DSP1
SW4SW3SW2
J3
J6 J7 J8 J9
F-4-12
F-4-13
Screw
J14
J13
J12
J10 J11
Chapter 4
0011-2667
4-5