Removing The Pickup Motor Unit; Delivery Motor; Disconnecting The Dadf - Canon DADF-Q1 Service Manual

[1]
3) Remove the three mounting screws [1], and detach the separation motor
unit [2].
[1]

3.3.2.4 Removing the Pickup Motor Unit

1) Disconnect J601 [1] and J602 [2], and free the cable from the edge saddle
[3].
[3]
2) Remove the two screws [1], and detach the belt motor driver PCB unit
[2].
4) Detach the fan mtor unit [1] by removing the two screws [2].
F-3-28
[2]
[1]
F-3-29
[1] [2]
F-3-30
[2]
[1]
F-3-31
[1]
5) Disconnect the pick up motor unit [1] connecter [2] and open/ closed
sensor (rear) [3] connecter [4].
6) Remove the two mounting screws [1], and detach the pickup motor
0011-2446
unit [2].

3.3.3 Delivery Motor

3.3.3.1 Disconnecting the DADF

1) Turn off the copier.
2) Disconnect the DADF's communication cable [1] from the copier.
3) Open the DADF fully.
4) Standing at the rear of the copier, lift the DADF to detach.
MEMO:
The hinge foot is equipped with a locking mechanism, requiring the DADF
F-3-32
[3]
[1]
[4]
[2]
F-3-33
[1]
[2]
F-3-34
F-3-35
Chapter 3
[2]
0011-8136
[1]
3-5