Manual Feed Registration Roller; Removing The; Removing The Main Cover - Canon DADF-Q1 Service Manual

Chapter 3
Push.
5) Move the side guides (front) [1]/(rear) [2] to the inside; then, remove the
two screws [3], and detach it.
[1]
[3]
After mounting it, be sure to adjust the horizontal registration.

3.4.10 Manual Feed Registration Roller

3.4.10.1 Removing the Front Cover
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
3-26
[7]
Freed.
[5]
[4]
[6]
[3]
F-3-178
[3]
[2]
F-3-179
F-3-180
F-3-181
F-3-182

3.4.10.2 Removing the Main Cover

1) Open the upper cover, and insert a screwdriver from above the hook; then,
remove the two hooks [1].
0011-8199
2) Free the hook of the pickup assembly cover [2] from the right stay; then,
detach it while paying attention to the hooks on the front and rear side
plates.
[1]
[1]
F-3-183
0011-8198