Separation Rollor; Removing The; Removing The Main Cover - Canon DADF-Q1 Service Manual

Feeder
Table of Contents

Advertisement

[2]
3) Remove the resin E-ring [1]; then, remove the roller arm [2], and detach
the pickup roller [3].
[1]
[2]

3.4.7 Separation Rollor

3.4.7.1 Removing the Front Cover
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-147
Free the claws,
and detach the cover.
F-3-144
[3]
F-3-145
F-3-146
F-3-148

3.4.7.2 Removing the Main Cover

1) Open the upper cover, and insert a screwdriver from above the hook; then,
remove the two hooks [1].
2) Free the hook of the pickup assembly cover [2] from the right stay; then,
detach it while paying attention to the hooks on the front and rear side
plates.
0011-8144
3) When you have removed the ADF controller cover, disconnect the con-
nector [3] of the ADF controller PCB; then, remove the screw [4], and re-
move the grounding wire [5]. Free the harness from the wire saddle [6],
and detach the other saddle [7].
[1]
[1]
F-3-149
[2]
Hooks
F-3-150
Chapter 3
0011-8143
3-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents